Objective: Become familiar with the Cisco Router.
Lab Equipment: Router 1 from the eRouters menu
Background Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface
1. When the lab has finished loading, the Router 1 window will open, and the text “Press Enter to Start” will appear.
2. Click inside the Router 1 window, and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts: the host name and the mode. Router is Router 1’s host name, and the > prompt indicates user mode.
Press Enter to get Started
Router>
3. Next, type the enable command to get to the privileged mode prompt.
Router>enable
Router#
4 . To return to user mode, simply type disable. From user mode, type logout or exit to exit the router.
Router#disable
Router>exit
Router con0 is now available
Press RETURN to get started
本文出自 “王乾De技术Blog” 博客,请务必保留此出处http://redking.blog.51cto.com/27212/69633
版权与免责声明
1、本站所发布的文章仅供技术交流参考,本站不主张将其做为决策的依据,浏览者可自愿选择采信与否,本站不对因采信这些信息所产生的任何问题负责。
2、本站部分文章来源于网络,其版权为原权利人所有。由于来源之故,有的文章未能获得作者姓名,署“未知”或“佚名”。对于这些文章,有知悉作者姓名的请告知本站,以便及时署名。如果作者要求删除,我们将予以删除。除此之外本站不再承担其它责任。
3、本站部分文章来源于本站原创,本站拥有所有权利。
4、如对本站发布的信息有异议,请联系我们,经本站确认后,将在三个工作日内做出修改或删除处理。
请参阅权责声明!