Objective: Learn how to set up Integrated Services Digital Network (ISDN) on Cisco routers.
Lab Equipment: Router 1 and Router 2 from the eRouters menu
1. Connect to Router 1, and assign it a host name of Router1.
Router>enable
Router#conf t
Router(config)#hostname Router1
2. Connect to Router 2, and assign it a host name of Router2.
Router>enable
Router#conf t
Router(config)#hostname Router2
3. Now, set up the connection between Router1 and Router2 using the BRI ports. Assign the BRI 0 interface of Router1 an IP address of 42.34.10.1 with a 255.255.255.0 subnet mask, enable the interface, and then exit interface configuration mode.
Router1(config)#interface BRI0
Router1(config-if)#ip address 42.34.10.1 255.255.255.0
Router1(config-if)#no shut
Router1(config-if)#exit
Router1(config)#
4. Now, connect to Router2, and assign its BRI 0 interface an IP address of 42.34.10.121 with a 255.255.255.0 subnet mask. Enable the interface, and then exit interface configuration mode.
版权与免责声明
1、本站所发布的文章仅供技术交流参考,本站不主张将其做为决策的依据,浏览者可自愿选择采信与否,本站不对因采信这些信息所产生的任何问题负责。
2、本站部分文章来源于网络,其版权为原权利人所有。由于来源之故,有的文章未能获得作者姓名,署“未知”或“佚名”。对于这些文章,有知悉作者姓名的请告知本站,以便及时署名。如果作者要求删除,我们将予以删除。除此之外本站不再承担其它责任。
3、本站部分文章来源于本站原创,本站拥有所有权利。
4、如对本站发布的信息有异议,请联系我们,经本站确认后,将在三个工作日内做出修改或删除处理。
请参阅权责声明!