Objective: Learn to establish a Frame Relay connection.

　　Lab Equipment: Router 1 and Router 2 from the eRouters menu

　　Background Reading: Lab Primer Lesson 9: Frame Relay

　　1. Connect to Router 1, and configure the host name to R1.

　　Router>enable

　　Router#conf t

　　Router(config)#hostname R1

　　R1(config)#

　　2. Assign an IP address of 10.1.1.1 255.255.255.0 to the serial 0 interface, and enable the interface.

　　R1(config)#interface serial 0

　　R1(config-if)#ip address 10.1.1.1 255.255.255.0

　　R1(config-if)#no shut

　　3. Now, connect to Router 2 and change the host name to R2.

　　Router>en

　　Router#config t

　　Router(config)#hostname R2

　　R2(config)#

　　4. Assign an IP address of 10.1.1.2 255.255.255.0 to the serial 0 interface, and enable the interface.