Objective: Become familiar with the basic configuration of the Cisco Catalyst 1912 switch.
Lab Equipment: Switch 1 from the eSwitches menu
Background Reading: Lab Primer Lesson 11: Switches
1. Connect to Switch 1. You should see the user mode prompt.
>
2. Display the list of commands available at this prompt.
>?
3. Now, enter privileged mode.
>enable
#
4. Display the available commands in privileged mode.
#?
5. Enter configuration mode.
#config terminal
(config)#
6. The host name is used for local identifi cation. When you log on to the switch, you see the host name in front of the prompt (if a host name has been configured). The host name can be used to identify the location or function of the switch. Set the switch’s host name to Boson.
(config)#hostname Boson
Boson(config)#
版权与免责声明
1、本站所发布的文章仅供技术交流参考,本站不主张将其做为决策的依据,浏览者可自愿选择采信与否,本站不对因采信这些信息所产生的任何问题负责。
2、本站部分文章来源于网络,其版权为原权利人所有。由于来源之故,有的文章未能获得作者姓名,署“未知”或“佚名”。对于这些文章,有知悉作者姓名的请告知本站,以便及时署名。如果作者要求删除,我们将予以删除。除此之外本站不再承担其它责任。
3、本站部分文章来源于本站原创,本站拥有所有权利。
4、如对本站发布的信息有异议,请联系我们,经本站确认后,将在三个工作日内做出修改或删除处理。
请参阅权责声明!